//////Deep Groove Ball Bearings – Inch size ball bearings​ – With Snap Groove, Snap Ring and Shields – RLS/N,NR,ZNR Series

Deep Groove Ball Bearings – Inch size ball bearings​ – With Snap Groove, Snap Ring and Shields – RLS/N,NR,ZNR Series

Deep groove ball bearings are non-separable and require little attention or maintenance in service, capable of operating at high speeds and are widely used radial bearings. The inner and outer ring of single row deep groove ball bearings have a deep groove raceway, the bearings are mainly used to carry radial loads and a part of axial loads in two directions. This kind of bearing can carry much heavy axial loads after the increase of radial clearance, thus, it can take the place of high speed angular contact ball bearings.   Deep groove ball bearing have various types in structure, beside open type bearings, shield or seals at both side can also be provided

Product Description

                                

Boundary dimensions Basic load ratings Limiting speeds Mass(Kg) Bearing Number
d D B rs min Cr Co rpm (Approx.) MAG
in mm in mm in mm in
1-1/4 31.750 2-3/4 69.850 11/16 17.462 1/16 1830 1230 11500 0.28 RLS10-N
1-3/8 34.925 3 76.200 11/16 17.472 1/16 2010 1390 10500 0.37 RLS11-N
1-1/2 38.100 3-1/4 82.550 3/4 19.050 1/32 2400 1700 9500 0.43 RLS12-N
1/2 12.700 1-5/16 33.338 3/8 9.525 1/32 520 380 24000 0.03 RLS4-N
5/8 15.875 1-9/16 39.688 7/16 11.112 1/22 720 430 21000 0.06 RLS5-N
3/4 19.050 1-7/8 47.625 9/16 14.288 1/16 1000 630 17000 0.11 RLS6-N
7/8 22.225 2 50.800 9/16 14.288 1/16 1200 760 16000 0.13 RLS7-N
1 25.400 2-1/4 57.150 5/8 15.875 1/16 1400 970 14000 0.17 RLS8-N
1-1/8 28.575 2-1/2 63.500 5/8 15.875 1/16 1530 1020 12500 0.21 RLS9-N

Your Name (required)

Your Email (required)

Your Message