//////Deep Groove Ball Bearings – Inch size ball bearings​ – With Snap Groove, Snap Ring and Shields – 16/N, NR, ZNR Series

Deep Groove Ball Bearings – Inch size ball bearings​ – With Snap Groove, Snap Ring and Shields – 16/N, NR, ZNR Series

Deep groove ball bearings are non-separable and require little attention or maintenance in service, capable of operating at high speeds and are widely used radial bearings. The inner and outer ring of single row deep groove ball bearings have a deep groove raceway, the bearings are mainly used to carry radial loads and a part of axial loads in two directions. This kind of bearing can carry much heavy axial loads after the increase of radial clearance, thus, it can take the place of high speed angular contact ball bearings.  Deep groove ball bearing have various types in structure, beside open type bearings, shield or seals at both side can also be provided.

Product Description

                              

Boundary dimensions Basic load ratings Mass(Kg) Bearing Number
d D B rs min Cr Co (Approx.) MAG
in mm in mm in mm in mm
7/16 11.112 29/32 23.019 5/16 7.938 0.015 0.4 3550 1930 0.016 1607-N
7/16 11.112 1-1/8 28.575 3/8 9.525 0.025 0.6 3920 2240 0.032 1615-N
1/2 12.700 1-1/8 28.575 3/8 9.525 0.025 0.6 3920 2240 0.030 1616-N
7/16 11.112 1-3/8 34.925 7/16 11.112 0.025 0.6 5880 3470 0.050 1620-N
1/2 12.700 1-3/8 34.925 7/16 11.112 0.025 0.6 5880 3470 0.048 1621-N
9/16 14.288 1-3/8 34.925 7/16 11.112 0.025 0.6 5880 3470 0.046 1622-N
5/8 15.875 1-3/8 34.925 7/16 11.112 0.025 0.6 5880 3470 0.040 1623-N
5/8 15.875 1-5/8 41.275 1/2 12.700 0.025 0.6 7230 4440 0.072 1628-N
3/4 19.050 1-5/8 41.275 1/2 12.700 0.025 0.6 7230 4440 0.065 1630-N
5/8 15.875 1-3/4 44.450 1/2 12.700 0.025 0.6 7230 4440 0.090 1633-N
3/4 19.050 1-3/4 44.450 1/2 12.700 0.025 0.6 7230 4440 0.085 1635-N
3/4 19.050 2 50.800 9/16 14.288 0.035 0.9 10780 6940 0.120 1638-N
7/8 22.225 2 50.800 9/16 14.288 0.035 0.9 10780 6940 0.110 1640-N
1 25.400 2 50.800 9/16 14.288 0.035 0.9 10780 6940 0.100 1641-N
1-1/8 28.575 2-1/2 63.500 5/8 15.875 0.035 0.9 12800 8400 0.210 1652-N
1-1/4 31.750 2-1/2 63.500 5/8 15.875 0.035 0.9 12800 8400 0.190 1654-N
1-1/4 31.750 2-9/16 65.088 11/16 17.462 0.035 0.9 14970 10000 0.220 1657-N
1-5/16 33.338 2-9/16 65.088 11/16 17.462 0.035 0.9 14970 10000 0.200 1658-N

Your Name (required)

Your Email (required)

Your Message